manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 385

Device Configuration 5 - 299

Figure 5-194

Device Overrides - Network - OSPF Virtual Interfaces - Basic Configuration screen - 

IPv6 tab - Add Address Prefix from Provider

Select 

OK

 to save the changes to the new IPv6 prefix from provider. Select 

Exit

 to close the screen without saving the 

updates.

40. Refer to the 

IPv6 Address Prefix from Provider EUI64 

table to set an (abbreviated) IP address prefix in EUI64 format.

Select 

+ Add Row

 to launch a sub screen wherein a new delegated prefix name and host ID can be defined in EUI64 format.

Figure 5-195

Device Overrides - Network - OSPF Virtual Interfaces - Basic Configuration screen - 

IPv6 tab - Add Address Prefix from Provider EUI64 

Select 

OK

 to save the changes to the new IPv6 prefix from provider in EUI64 format. Select 

Exit

 to close the screen without 

saving the updates.

41.  Refer to the 

DHCPv6 Relay 

table to set the address and interface of the DHCPv6 relay.

The DHCPv6 relay enhances an extended DHCP relay agent by providing support in IPv6. DHCP relays exchange messages 
between a DHCPv6 server and client. A client and relay agent exist on the same link. When A DHCP request is received 
from the client, the relay agent creates a relay forward message and sends it to a specified server address. If no addresses 
are specified, the relay agent forwards the message to all DHCP server relay multicast addresses. The server creates a relay 
reply and sends it back to the relay agent. The relay agent then sends back the response to the client.

Delegated Prefix 
Name

Enter a 32 character maximum name for the IPv6 address prefix from provider. 

Host ID

Define the subnet ID, host ID and prefix length.

Delegated Prefix 
Name

Enter a 32 character maximum name for the IPv6 prefix from provider in EUI format. Using 
EUI64, a host can automatically assign itself a unique 64-bit IPv6 interface identifier without 
manual configuration or DHCP. 

Host ID

Define the subnet ID and prefix length.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды