manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 130

5 - 44 WiNG 5.6 Access Point System Reference Guide 

Figure 5-29

Port Channels - Security tab

12. Refer to the 

Access Control

 section. As part of the port channel’s security configuration, Inbound IPv4 IP, IPv6 IP and MAC 

address firewall rules are required.

Use the 

Inbound IP Firewall Rules

 and 

Inbound MAC Firewall Rules

 drop-down menus to select the firewall rules to 

apply to this profile’s port channel configuration. The firewall inspects IP and MAC traffic flows and detects attacks typically 
not visible to traditional wired firewall appliances

Use the 

IPv4 Firewall Rules

 drop-down menu to select the IPv4 specific firewall rules to apply to this profile’s port channel 

configuration. IPv4 is a connection less protocol for packet switched networking. IPv4 operates as a best effort delivery 
method, as it does not guarantee delivery, and does not ensure proper sequencing or duplicate delivery (unlike (TCP). IPv4 
hosts can use link local addressing to provide local connectivity.

Use the 

IPv6 Firewall Rules

 drop-down menu to select the IPv6 specific firewall rules to apply to this profile’s port channel 

configuration. IPv6 is the latest revision of the Internet Protocol (IP) designed to replace IPv4. IPV6 provides enhanced 
identification and location information for computers on networks routing traffic across the Internet. IPv6 addresses are 
composed of eight groups of four hexadecimal digits separated by colons. 

If a firewall rule does not exist suiting the data protection needs of the target port channel configuration, select the 

Create

 

icon to define a new rule configuration or the 

Edit

 icon to modify an existing firewall rule configuration.

13. Refer to the 

Trust

 field to define the following:

Trust ARP Responses

Select this option to enable ARP trust on this port channel. ARP packets received on this 
port are considered trusted and information from these packets is used to identify rogue 
devices within the managed network. The default value is disabled.

Trust DHCP Responses

Select this option to enable DHCP trust. If enabled, only DHCP responses are trusted 
and forwarded on this port channel, and a DHCP server can be connected only to a 
DHCP trusted port. The default value is enabled.

ARP header Mismatch 
Validation

Select this option to enable a mismatch check for the source MAC in both the ARP and 
Ethernet header. The default value is enabled.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды