manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 141

Device Configuration 5 - 55

Figure 5-35

Access Point Radio - Advanced Settings tab

22. Refer to the 

Aggregate MAC Protocol Data Unit (A-MPDU)

 field to define how MAC service frames are aggregated by 

the access point radio.

23. Use the 

Aggregate MAC Service Data Unit (A-MSDU) 

drop-down menu to set the supported A-MSDU mode.

Available modes include 

Receive Only

 and 

Transmit and Receive

. 

Transmit and Receive

 is the default value. Using Transmit 

and Receive, frames up to 4 KB can be sent and received. The buffer limit is not configurable.

24. Set the following 

Aeroscout Properties

 for the selected access point radio:

25. Set the following 

Ekahau Properties

 for the selected access point radio:

A-MPDU Modes

Use the drop-down menu to define the A-MPDU mode supported. Options include 

Transmit Only

, 

Receive Only

, 

Transmit and Receive

 and 

None

. The default value is 

Transmit and Receive. Using the default value, long frames can be both sent and received 
(up to 64 KB). When enabled, define either a transmit or receive limit (or both).

Minimum Gap Between 
Frames

Use the drop-down menu to define the minimum gap between A-MPDU frames (in 
microseconds). The default value is 4 microseconds.

Received Frame Size 
Limit

If a support mode is enable allowing A-MPDU frames to be received, define an advertised 
maximum limit for received A-MPDU aggregated frames. Options include 8191, 16383, 
32767 or 65535 bytes. The default value is 65535 bytes.

Transmit Frame Size 
Limit

Use the spinner control to set limit on transmitted A-MPDU aggregated frames. The 
available range is from 2000 - 65,535 bytes). The default value is 65535 bytes.

Forward

Use the Forward option to forward Aeroscout packets to the server.

MAC to be forwarded

Use the text area to provide a MAC address that identifies that the packet is received 
from Aeroscout tags.

Forwarding Host

Use the Forward Host text area to provide the IP address of the Ekahau Engine.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды