manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 153

Device Configuration 5 - 67

8. Set the following 

DNS Servers IPv6

 configuration data when using IPv6:

9. Select 

OK 

to save the changes made to the DNS configuration. Select

 Reset 

to revert to the last saved configuration.

5.2.6.2 ARP

Profile Network Configuration

Address Resolution Protocol 

(ARP) is a protocol for mapping an IP address to a hardware MAC address recognized on the 

network. ARP provides protocol rules for making this correlation and providing address conversion in both directions. 

When an incoming packet destined for a host arrives, the gateway uses ARP to find a physical host or MAC address that 
matches the IP address. ARP looks in its ARP cache and, if it finds the address, provides it so the packet can be converted to 
the right packet length and format and sent to the destination. If no entry is found for the IP address, ARP broadcasts a request 
packet in a special format to all the machines on the LAN to see if one machine knows that it has that IP address associated 
with it. A machine that recognizes the IP address as its own returns a reply. ARP updates the ARP cache for future reference, 
and then sends the packet to the MAC address that replied.

To define an ARP supported configuration:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

.

3. Select 

System Profile

 from the options on left-hand side of the UI.

4. Expand the 

Network

 menu and select

 ARP

.

5. Select 

+ Add Row

 from the lower right-hand side of the screen to populate the ARP table with rows used to define ARP 

network address information.

Figure 5-39

Network - ARP screen

IPv6 DNS Name 
Server 

Provide the default domain name used to resolve IPv6 DNS names. When an IPv6 host is 
configured with the address of a DNS server, the host sends DNS name queries to the server 
for resolution. A maximum of three entries are permitted.

IPv6 DNS Server 
Forward

Select the check box to enable IPv6 DNS domain names to be converted into numerical IP 
destination addresses. The setting is disabled by default.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды