Montesa 4Ride MST260 2016, Руководство по ремонту

Страница: 109 / 158

4-1 4-1
(1) AXLE PINCH BOLT
(2) AXLE
Front Wheel
Removal
Loosen the axle pinch bolt.
Support the motorcycle and front wheel off the ground.
Remove the axle and front wheel.
Do not depress the brake lever after the front wheel is
removed.
The caliper pistons will move and make reassembly
difficult.
Disassembly/Assembly
!
WARNING
A contaminated brake disc or pad reduces stopping
power, and can cause a serious injury or death.
Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
(1) BRAKE DISC
(2) COLLAR
(3) DISC BOLT
(4) LEFT WHEEL BEARING
(5) DISTANCE COLLAR
(6) RIGHT WHEEL BEARING
(a) 25 ± 1 mm (1.0 ± 0,0394 in)
4. Frame servicing
Spokes: Check spoke tension frequently between the first
few rides. As the spokes, spoke nuts and rim contact
points seat-in, the spokes may need to be retightened.
Once past this initial seating-in period, the spokes should
hold their tension. Still, be sure your race maintenance
program includes checking spoke tension and overall
wheel condition on a regular basis.
Drive the bearing
into the hub until it
stops.
When unassembling change bolt for new one’s
Apply a locking agent to the threads
Torque: 18 N•m (1.8 kgf•m)
6
5
4 3
2 1
a
2
1