Montesa 4Ride MST260 2016, Руководство по ремонту

Страница: 45 / 158

Service and maintenance
2-17 2-17
Inspection
1. Check for a broken or collapsed spring.
2. Bounce the rear of the machine up and down and check
for smooth suspension action.
3. Check the rear shock absorber for a bent shaft or oil
leaks.
4. Push the rear wheel sideways to check for worn or
loose swingarm bearings. There should be no move-
ment. If movement is felt, replace the pivot bearings
(page 4-18).

When your 4RIDE is new, your suspension will break-in
as you ride.

After break-in is completed, test ride your 4RIDE with
the rear suspension at the standard setting before
attempting any adjustments.
 Make all rebound damping adjustment in one-click
increments. Adjusting two or more clicks at a time
may cause you to pass over the best adjustment. Test
ride after each adjustment.

If you become confused about adjustment settings,
return to the standard position and start over.
(1) REBOUND ADJUSTER
Rear Suspension
The swingarm is controlled by a shock absorber. The The
rear shock absorber should always be adjusted for the
rider’s weight and track conditions by using one or more
of the following methods.

Spring pre-load
Turning the spring pre-load adjuster adjusts the spring
initial pre-load length.

Rebound damping
Turning the rebound damping screw adjusts how
quickly the shock absorber extends.
(1) PRE-LOAD ADJUSTER
1
1