Montesa 4Ride MST260 2016, Руководство по ремонту

Страница: 12 / 158

Service data
1-4 1-4
Unit: mm (in)
Item Standard Service Limit
Wheels/Tires
Axle runout 0.20 (0.008)
Cold tyre pressure:
For road use
Off Road use only Front
Rear
100 kPa (1,02 kgf/cm 2 )
70 kPa (0,7 kgf/cm 2 )
60 kPa (0,6 kgf/cm 2 )
–
–
–
Wheel rim runout Radial
Axial
–
–
2.0 (0,08)
2,0 (0,08)
Drive chain slack 25 – 35 (1,0 – 1,4) –
Drive chain slider thickness –
2.0 (0.08) from
upper surface
Front Suspension TECH
Left fork spring free length 445 (17,5) 438 (17,2)
Fork tube runout 0,35 – 0,50 (0,014 – 0,020) 0,20 (0,008)
Recommended fork fluid TECH OJ 01
Pre-load adjuster setting 4±0,5 turns out from full soft –
Damping adjuster setting
Tension adjuster:
16±2 clicks from full hard –
Fork oil level
Right
Left
60 (2,3)
125 (4,9)
–
–
Fork oil capacity
Right
Left
385 cm
3
375 cm
3
–
–
Unit: mm (in)
Item Standard Service Limit
Rear Suspension R16V
Shock absorber spring pre-load 126 (4,96) –
Spring free length 130 (5,1) –
Tension adjuster setting 10±2 clicks from full hard –
Brakes
Recommended brake fluid DOT 4 brake fluid –
Front Brake disc thickness
Brake disc runout
3,5 (0,14)
–
3,0 (0,12)
0,15 (0,006)
Rear Brake disc thickness
Brake disc runout
3,5 (0,14)
–
3,0 (0,12)
0,15 (0,006)
Electrical
Spark plug Standard: NGK: CR6EH-9 –
Spark plug gap 0,80 – 0,90 (0,031 – 0,035) –
Ignition coil resistance
Primary
Secondary with plug cap
Secondary without plug cap
2,6 -3,2 Ω (20º C)
17,3 -22,8 k Ω (20º C)
13,5 – 16,5 K Ω (20º C)
–
–
–
Ignition pulse generator
Resistance 85 -115 Ω (20º C) –
Alternator
Regulated voltage
Charging coil resistance
ECT sensor resistance
13,5 – 14,5 V/1,800 min-1 (rpm)
0,7 -1,0 Ω (20º C)
2,3 -2,6 k Ω (20º C)
–
–
–
Bulbs
Headlight
Position light
Brake/tail light
Turn signal light
Speedometer
12V – 35/35W HS1
12V – 5W
6 LED DIODES
12V – 10W X 4
12V
–
–
–
–
–