5-4
5-4
Electrical servicing
If the resistance is out of specification, measure the
resistance at the ignition pulse generator 2P (Natural)
connector.
If the measured resistance at ECM 32P (Black) connector
is incorrect and the ignition pulse generator 2P (Natural)
connector is correct, check the wire harness.
If the resistance is still out of standard, replace the ignition
pulse generator/stator assembly (page 3-52).
(1) 2P (NATURAL) CONNECTOR
Ignition Pulse Generator Inspection
Check the ignition pulse generator resistance at the ECM
32P (Black) connector (page 5-5).
Connection: White/yellow – Green/yellow
Standard: 85 - 115
(20˚C/68˚F)
(1) 32P (BLACK) CONNECTOR
(1) WIRE CLAMP
(2) PRIMARY WIRES
(3) BOLTS
(4) IGNITION COIL
Remove the wire clamp.
Disconnect the primary wires from the ignition coil.
Remove the mounting bolts and ignition coil.
Installation is in the reverse order of removal.
Route the spark plug wire properly and secure it with
tiewrap.
L
L
L
1
2
1
1
4
3
2
3
2
1
1
Содержание 4Ride MST260 2016
