Montesa 4Ride MST260 2016, Руководство по ремонту

Страница: 16 / 158

Service data
1-8 1-8
Lubrication & Seal Points
Engine
Item Material Remarks
Crankcase sealing bolt threads and seating surface Repsol 4T-stroke engine oil
Cylinder bore inner surface
Cylinder head nut threads and seating surface
Piston inner area, piston pin area
Piston pin outer surface
Piston ring surface
Crankshaft oil seal lips
Decompressor weight sliding surface
Valve adjusting nut threads
Oil pump rotor sliding surface
Clutch outer sliding surface
Clutch friction disc surface
Clutch center nut threads and seating surface
Clutch lifter piece needle bearing area
Primary drive gear bolt threads and seating surface
Shift drum grooves
Gearshift spindle serration
Flywheel nut threads and seating surface
Each bearing
Each O-ring
Crankcase inside (transmission oil)
ELF HTX740
Crankcase inside (engine oil) Repsol 4T-stroke engine oil
10W-30
600 cm
3
Item Material Remarks
Connecting rod small end I.D. Molybdenum oil solution
(A 50/50 mixture of
molybdenum disulfide
grease and engine oil
Connecting rod big end
Camshaft outer surface
Rocker arm I.D.
Valve stem sliding surface
Valve stem end sliding surface
Clutch outer collar sliding surface
Mainshaft spline and gear sliding surface
Countershaft spline and gear sliding surface
Shift fork I.D. and gear contact area
Shift fork shaft surface
Kickstarter spindle spline area and gear sliding
surface
Each gear
Right crankshaft bearing set plate bolt threads
Locking agent 6.5 ± 1 mm
Right mainshaft bearing/shift drum bearing set plate
bolt threads
Left coutershaft bearing set plate bolt threads
3.5 ± 1 mm
Left crankcase sealing bolt threads
Cylinder mounting bolt threads
Cylinder head sealing bolt threads
6.5 ± 1 mm
Cam chain tensioner bolt threads
Shift drum center bolt threads
Ignition pulse generator bolt threads
Stator mounting bolt threads