4-2
4-2
Frame servicing
(1) FRONT FENDER
(2) TOP BRIDGE
(3) BOTTOM BRIDGE
(4) FORK LEG
Fork
Removal
Remove the front wheel (page 4-1).
Remove the front fender.
Loosen the top bridge pinch bolt.
If the forks are to be disassembled, loosen the fork bolt.
NOTICE
To avoid damaging the fork bolt threads, loosen the top
bridge pinch bolt before loosening the fork bolts.
Loosen the bottom bridge pinch bolts, and pull the fork
tube down and out.
(1) AXLE
(1) AXLE PINCH BOLT
Installation
Clean the surfaces where the axle and axle clamps
contact each other.
Place the front wheel between the fork legs, while
inserting the brake disc between brake pads without
damaging them.
Apply thin layer of grease to the axle surface.
Apply grease to the axle threads.
Install the axle from the right side through the wheel.
Tighten the axle to the specified torque.
Torque: 69 N•m (7.0 kgf•m, 51 lbf•ft)
While keeping the fork parallel, tighten the axle pinch bolt
to the specified torque.
Torque: 21 N•m (2.1 kgf•m, 17 lbf•ft)
1
1
4
3
2
1
Содержание 4Ride MST260 2016
