54D0700
5
FP2087
BDV prod features
BDV Series Gas Fireplace
pRODuct FEAtuRES and cODE AppROVAL
Off/Pilot/On Knob
Optional Remote
Receiver
Figure 1 -
BDV300, 400, 500, 600 Fireplace
(MIllivolt Control Shown)
• This appliance has been certified for
use with either natural or propane
gas. See appropriate data plates.
• This appliance is not for use with
solid fuels.
• The appliance is approved for bed-
room or bedsitting room installa
-
tions.
• The appliance must be installed in
accordance with local codes if any. If
none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the
USA, CSA B149 in Canada.
• This appliance is mobile home
approved.
• The appliance must be properly con-
nected to a venting system.
• The appliance is not approved for
closet or recessed installations.
Hi/Lo Knob
pRODuct SpEcIFIcAtIONS
cODE AppROVAL
Direct Vent type appliances draw all combustion air from outside of the dwelling through the vent pipe.
These appliances have been tested by CSA and found to comply with the established standards for DIRECT
VENT GAS FIREPLACE HEATERS in the USA and Canada as follows:
LIStED VENtED GAS FIREpLAcE hEAtER
TESTED TO: ANSI Z21.88b-2008 / CSA 2.33b-2008 STANDARDS
A manufactured home (USA only) or mobile home OEM installation must conform with the
Manufactured Home
Construction and Safety Standard,
title 24 cFR, part 3280,
or when such a standard is not applicable, the
Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1
, or
Standard for Gas Equipped
Recreational Vehicles and Mobile Housing, CSA Z240.4
.
Blower
Control
On/Off/RS Switch
Ignitor
FP2087