Monessen Hearth Direct Vent Gas Fireplace BDV300 страница 67 Скачать руководство пользователя

Страница: 67 / 68

LIMItED LIFEtIME WARRANty pOLIcy

LIFEtIME WARRANty

The following components are warranted for life to the original owner, subject to proof of purchase: Firebox,

Combustion Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVE yEAR WARRANty

The following components are warranted five (5) years to the original owner, subject of proof of purchase: Ce-

ramic Fiber Logs.

BASIc WARRANty

MHSC warrants the components and materials in your gas appliance to be free from manufacturing and material

defects for a period of two years from date of installation. After installation, if any of the components manufactured

by MHSC in the appliance are found to be defective in materials or workmanship, MHSC will, at its option, replace

or repair the defective components at no charge to the original owner. MHSC will also pay for reasonable labor

costs incurred in replacing or repairing such components for a period of two years from date of installation. Any

products presented for warranty repair must be accompanied by a dated proof of purchase.

This Limited Lifetime Warranty will be void if the appliance in not installed by a qualified installer in accordance

with the installation instructions. The Limited Lifetime Warranty will also be void if the appliance is not operated

and maintained according to the operating instructions supplied with the appliance, and does not extend to (1)

firebox/burner assembly damage by accident, neglect, misuse, abuse, alterations, negligence of others, including

the installation thereof by unqualified installers, (2) the costs of removal, reinstallation or transportation of defec-

tive parts on the appliance, or (3) incidental or consequential damage. All service work must be performed by an

authorized service representative.

This warranty is expressly in lieu of other warranties, express or implied, including the warranty of merchantability

of fitness for purpose and of all other obligations or liabilities. MHSC does not assume for it any other obligations

or liabilities in connection with sale or use of the appliance. It states that do not allow limitations on how long an

implied warranty lasts, or do not allow exclusion of indirect damage, those limitations of exclusions may not apply

to you. You may also have additional rights not covered in the Limited Lifetime Warranty.

MHSC reserves the right to investigate any and all the claims against the Limited Lifetime Warranty and decide

upon method of settlement.

IF WARRANty SERVIcE IS NEEDED...

1. Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial

number of your MHSC product.

2. DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

Содержание Direct Vent Gas Fireplace BDV300





































































Результаты поиска

Содержание Direct Vent Gas Fireplace BDV300

Отзывы:

Похожие инструкции для Direct Vent Gas Fireplace BDV300

Бренды по названию

Популярные бренды

Monessen Hearth Direct Vent Gas Fireplace BDV300, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Direct Vent Gas Fireplace BDV300

Отзывы:

Похожие инструкции для Direct Vent Gas Fireplace BDV300

Бренды по названию

Популярные бренды