manualshive.com logo in svg

Mitsubishi MELSEC QJ71C24, Руководство пользователя

"Модуль коммуникации Mitsubishi MELSEC QJ71C24 позволяет устанавливать соединение между контроллером и другими устройствами. Для дополнительной информации и настройки обязательно скачайте бесплатный Руководство пользователя с manualshive.com. Настройте свою систему легко и без проблем благодаря этому руководству."

Поделиться
Скачать
background image

 
 
 

A - 22                                                                                                                                                  A - 22 

 
DEFINITIONS AND DESCRIPTIONS OF TERMINOLOGY 

The following table lists the definitions and descriptions of terminology used in this manual and related 
manuals for the Q series serial communication modules. 

Terms Description 

A compatible IC frame  

(Formats 1 to 4) 

One of the message formats for the serial communication module for performing communication 
using the MC protocol and ASCII code data. 
This is the same message format as when communicating using the protocol for the A series 
computer link modules. Device memory read/write operations for the QCPU are allowed within 
the device range of the AnACPU. 
For details, see the Reference Manual. 

Bidirectional protocol 

A communication procedure for the serial communication modules and one of the data 
communication functions for communicating any data between the programmable controller CPU 
and an opposite device. Details are explained in Chapter 7. 

Independent operation 

A mode of interface operation to communicate data with external devices using a function 
specified in each communication protocol setting. Two interfaces of serial communication 
modules do not interact. 

Linked operation 

The operation mode of each of the two interfaces for a serial communication module that are 
connected to external devices and linked to one another in order to send/receive data to/from the 
external devices. 
The two interfaces communicate data using the identical data-communication function (MC 
protocol (identical format) or non procedure protocol) and the identical transmission 
specifications. (Linked operation using the bidirectional or pre-defined protocol is not allowed.) 

MELSEC communication protocol  

(MC protocol) 

A communication procedure for the Q series serial communication modules or the Ethernet 
interface modules, and a name of communication method for accessing to the programmable 
controller CPU from an opposite device. (This is called the MC protocol in this manual.) 
There are two communication methods; one uses ASCII code data and the other uses binary 
code data. 
Details are explained in the Reference Manual. 

Message send function 

(Printer function) 

This function registers character data (messages) to be sent to external devices (mainly printers) 
in the serial communication module as an user frame in advance, and sends the registered data 
for multiple user frames using the non procedure protocol (sent by an instruction from the 
programmable controller CPU). 

Multidrop connection 

A name of the connection when multiple external devices or other serial communication modules are 
connected in a 1:n or m:n mode using the serial communication module's RS-422/485 interface. 

Non procedure protocol 

A user's communication procedure and one of the data communication functions for 
communicating any data between the programmable controller CPU and an opposite device. 
Details are explained in Chapter 6. 

Packet 

A string of data used for communication with external devices by the pre-defined protocol. 

Pre-defined protocol 

One of the data communication functions available for the QJ71C24N(-R2/R4). 
In data communication between the QJ71C24N(-R2/R4) and an external device, data can be sent 
and received by using a protocol for the external device. 
This must be set in GX Configurator-SC (Pre-defined protocol support function). 
The details are described in Chapter 8 and the Operating Manual (Pre-defined protocol support 
function). 

Pre-defined protocol support function 

A function available in GX Configurator-SC (Pre-defined protocol support function), which 
includes: 
•   Registration of the protocol appropriate to each external device 
•   Writing protocol setting data to or reading them from the flash ROM of the QJ71C24N(-R2/R4)
•   Debug support function 
The details are described in Chapter 8 and the Operating Manual (Pre-defined protocol support 
function). 

 

Содержание MELSEC QJ71C24



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC QJ71C24

S&C 5800 Series Operating Instructions Manual preview
5800 Series
Бренд: S&C Страницы: 40
S&C 5800 Series Troubleshooting Manual preview
5800 Series
Бренд: S&C Страницы: 34
Jafar 2911 Operation And Maintenance Manual preview
2911
Бренд: Jafar Страницы: 10
Jafar 2911 Operating Manual preview
2911
Бренд: Jafar Страницы: 8
jbc DI Series Manual preview
DI Series
Бренд: jbc Страницы: 4
CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Бренд: CAME Страницы: 32
Aalborg SMV Operating Manual preview
SMV
Бренд: Aalborg Страницы: 15
Aalborg DFC Operating Manual preview
DFC
Бренд: Aalborg Страницы: 48
Daikin ALTHERMA User Manual preview
ALTHERMA
Бренд: Daikin Страницы: 5
Daikin Madoka User Manual preview
Madoka
Бренд: Daikin Страницы: 2
Daikin BRC7E530W8 Operation Manual preview
BRC7E530W8
Бренд: Daikin Страницы: 12
Daikin BRC1H81K Installation And Operation Manual preview
BRC1H81K
Бренд: Daikin Страницы: 12
Daikin BRC1H71W Operation Manual preview
BRC1H71W
Бренд: Daikin Страницы: 46
Daikin BRC1D71 Operation Manual preview
BRC1D71
Бренд: Daikin Страницы: 21
Daikin BRC1D517 Operation Manual preview
BRC1D517
Бренд: Daikin Страницы: 20
IDS X64 Manual preview
X64
Бренд: IDS Страницы: 2
IFM Electronic ecomat 100 R 360 Operating Instructions Manual preview
ecomat 100 R 360
Бренд: IFM Electronic Страницы: 16
IFM Electronic Ecomot300 AC2630 Operating Instructions Manual preview
Ecomot300 AC2630
Бренд: IFM Electronic Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды