Mitsubishi 1992 3000GT, Руководство по обслуживанию

Страница: 496 / 1308

17-36
ENGINE AND EMISSION CONTROL Cruise Control System
0 0 0 0 2 4 4 0
2141014;
1992 model
From 1993 model
meter
Battery
Resistance
3-10
STOP LIGHT SWITCH/BRAKE SWITCH CHECK
(1) Disconnect the connector.
(2) Check for continuity between the terminals of the switch.
Measurement
conditions
For brake switch
terminal
For stop light
switch terminal I
,
1 4 2
3
When brake pedal
depressed.
When brake pedal
not
b--+--I
CLUTCH PEDAL POSITION SWITCH CHECK <M/T>
(1) Disconnect the connector.
(2) Check that there is continuity between the terminals when
the clutch pedal is depressed, and that there is no continu-
ity when the pedal is released.
PARK/NEUTRAL POSITION SWITCH POSITION)
CHECK
(1) Disconnect the connector.
(2) On 1992 models, check to be sure that there is continuity
between connector terminals (8) and (9) when the shift
(3)
lever is moved to the “N” range.
From 1993 models, check to be sure that there is continuity
between connector terminal (8) and (7) when the shift
lever is moved to the “N” range.
VEHICLE SPEED SENSOR CHECK
to 1993 models (Non Turbo)>
Use circuit tester to check circuit repeats off/on between termi-
nals when speedometer shaft turned several times.
to 1993 models (Turbo) and From 1994 models>
(1) Remove the vehicle’s speed sensor and connect as shown
in the illustration, using a 3-10 kS2 resistance.
(2) Use a voltmeter to check for voltage at terminals (2) and
(3) when the pulse generator shaft is turning. (One revolu-
tion is four pulses.)
TSB Revision