Mitsubishi 1992 3000GT, Руководство по обслуживанию

Страница: 1020 / 1308

42-14
BODY
On-vehicle Service
Stabilizer
inner front
up stop
Window glass-end
in.)
I
Delta sash
Stabilizer
inner front
Stabilizer
inner rear
t r a c k
Door regulator
9. Force the stabilizer inner front onto the glass guide slider
of the window glass assembly and tighten in position.
10. Force the up stop onto the glass stop of the window
glass assembly and tighten in position.
Tighten the glass guide front and rear tracks.
Caution
Do not turn the adjusting bolts of guide tracks.
12. Adjust the delta sash. so that the window glass end and
the delta sash lip end are positioned as illustrated and
tighten in position.
13. Install the drip line weatherstrip.
14. Install the front pillar trim.
15. Install the door trim and the waterproof film. (Refer to
16. Open and close the door and move up and down the
window glass to check fitting of the door.
(When not removing and installing the door
window glass)
1. Remove the door trim and waterproof film. (Refer to
2. Loosen the bolts and nuts of the following parts.
l
Glass guide front track
l
Glass guide rear track
l
Door window regulator
l
Stabilizer inner front
l
Stabilizer inner rear
. u p s t o p
3. Lift the window glass up to its highest position.
TSB Revision