Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 805 / 1164

BODY -
Door
42-33
DOOR OUTSIDE HANDLE PLAY CHECK
42300160164
1. Check that the door outside handle play is within the
standard value range.
Standard value (B):
Front door:
<SPACE RUNNER> 2.1 mm or more
<SPACE WAGON> 1.9 mm or more
Rear door: 2.4 mm or more
2. If the door outside handle play is not within the standard
value range, check the door outside handle or the door
latch assembly. Replace, if necessary.
POWER WINDOW OPERATION CURRENT
INSPECTION
42900110105
1. Remove the power window fuse and connect a circuit
analyser as shown in the illustration.
2. When the power window switch is pulled to close the
window, a large amount of current flows at the time the
window starts to close and when it is fully closed, so
measure the operation current in the interval between
these two points.
Standard value:
5
±
1 A (for 14 - 15 V power supply voltage at
25
_
C)
3. If the operation current is outside the standard value,
refer to “Troubleshooting” (P.42-29).
CIRCUIT BREAKER (INCORPORATED IN THE
POWER WINDOW MOTOR) INSPECTION
42900170134
1. Pull the power window switch to fully close the window
glass, and keep pulling the switch for a further 10 seconds.
2. Release the power window switch and immediately press
it to open the window. The condition of the circuit breaker
is good if the power window glass starts to move
downwards within 60 seconds.
Section A - A
A
A
B