Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 1033 / 1164

CHASSIS ELECTRICAL -
Combination Meters
54-21
ON-VEHICLE SERVICE
54300090237
SPEEDOMETER CHECK
1. Adjust the pressure of the tyres to the specified level.
(Refer to GROUP 31 - Service Specifications.)
2. Set the vehicle onto a speedometer tester and use wheel
chocks to hold the rear wheels.
3. Check if the speedometer indicator range is within the
standard values.
Caution
Do
not operate the clutch suddenly. Do not
increase/decrease speed rapidly while testing.
Standard values:
Standard indication km/h
(mph)
Allowable range km/h (mph)
40 (20) 40 - 48 (20 - 25)
80 (40) 80 - 92 (40 - 47)
120 (60) 120 - 136 (60 - 69)
160 (80) 160 - 180 (80 - 91)
- (100) - (100 - 114)
TACHOMETER CHECK
54300100244
1. Insert a paper clip in the engine speed detection connector
from the harness side, and attach the engine
speedometer.
NOTE
For tachometer check, use of a fluxmeter-type engine
speedometer is recommended. (Because a fluxmeter only
needs to be clipped to the high tension cable.)
2. Compare the readings of the engine speedometer and the
tachometer at every engine speed, and check if the
variations are within the standard values.
Standard values:
700 r/min:
±
100 r/min
3,000 r/min:
±
150 r/min
5,000 r/min:
±
250 r/min
6,000 r/min:
±
300 r/min
Wheel chocks
Engine speed
detection
connector
Engine
speed
detection
terminal