Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 574 / 1164

REAR AXLE <4WD> -
General Information/Service Specifications
27B-2
GENERAL INFORMATION
27100010231
The drive shaft has two joints (D.O.J. and B.J.)
at each side. The D.O.J. joint at the differential
side can slide smoothly in the axial direction. The
B.J. type constant velocity joint is used at the hub
side.
In addition, for vehicles with ABS, an ABS rotor
for detecting vehicle wheel speed is mounted in
the drive shaft. The wheel bearing used is an
angular ball bearing, which is resistant against
lateral load.
ABS rotor
<Vehicles with ABS>
Wheel bearing
Rear hub
Drive shaft
B.J.
D.O.J.
Drive shaft
Differential carrier
SERVICE SPECIFICATIONS
27100030343
Items Standard value Limit
Rear axle total backlash mm - 5
Wheel bearing axial play mm - 0.05
Setting of D.O.J. boot length mm 80 -
Drive gear backlash mm 0.11 - 0.16 -
Drive gear runout mm - 0.05
Differential gear backlash mm 0 - 0.076 0.2
Drive pinion
turning torque
Without
oil seal
When replacing with a new
bearing (with rust-prevention oil)
0.9 - 1.2 -
Nm
When using a new bearing or
when reusing (gear oil application)
0.4 - 0.5 -
With oil
seal
When replacing with a new
bearing (with rust-prevention oil)
1.0 - 1.3 -
When using a new bearing or
when reusing (gear oil application)
0.5 - 0.6 -