Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 758 / 1164

STEERING -
Power Steering Gear Box
37A-26
3. Insert the tapered side of the special tool from the pinion
gear side, and compress the seal ring.
"
H
A
OIL SEAL INSTALLATION
Use the special tool to press the oil seal into the valve housing.
The upper surface of the oil seal should project outwards
approx. 1 mm from the housing edge surface.
Caution
If the oil seal is flush with or lower than the housing
edge, it will cause oil leaks and require reassembly.
"
I
A
END PLUG INSTALLATION
1. Apply the specified sealant to the threaded part of the
end plug.
Specified sealant:
3M ATD Part No.8661 or equivalent
2. Secure the threaded portion of the end plug at two places
by using a punch.
"
J
A
RACK SUPPORT COVER/LOCKING NUT
INSTALLATION
<L.H. drive vehicles>
1. Use the special tool (MB991204) to tighten the rack
support cover to 20 Nm.
2. Slide the tie rod to the left and right by 60 mm or more
three times, and then re-tighten the rack support cover
to 20 Nm.
3. Use the special tools (MB991204, MB991614) to return
the rack support cover 45 _ .
4. Use the special tool (MB991204) to hold the rack support
cover and tighten the locking nut to the specified torque
44Nm.
<R.H. drive vehicles>
1. Use the special tool (MB991204) to tighten the rack
support cover to 15 Nm.
2. Use the special tools (MB991204, MB991614) to return
the rack support cover 30 _ .
3. Use the special tool (MB991204) to hold the rack support
cover and tighten the locking nut to the specified torque
59 Nm.
Approx. 1 mm
MB990941
End plug
Sealant
End plug
Tie rod
60 mm or more
MB991204
MB991614
MB991204
MB991614