Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 636 / 1164

FRONT SUSPENSION -
Lower Arm Assembly
33A-12
INSPECTION
33200170117
D Check the bushing for wear and deterioration.
D Check the lower arm for bend or breakage.
D Check the stay for deterioration or damage.
D Check all bolts for condition and straightness.
LOWER ARM BALL JOINT ROTATION STARTING
TORQUE CHECK
1. After shaking the ball joint stud several times, install the
nut to the stud and use the special tool to measure the
rotation starting torque of the ball joint.
Standard value: 2.0 - 8.8 Nm
2. When the measured value exceeds the standard values,
replace the lower arm assembly.
3. When the measured value is lower than the standard
value, check that the ball joint turns smoothly without
excessive play. If so, it is possible to use that ball joint.
LOWER ARM BALL JOINT DUST COVER CHECK
1. Check the dust cover for cracks or damage by pushing
it with finger.
2. If the dust cover is cracked or damaged, replace the
lower arm assembly.
NOTE
Cracks or damage of the dust cover may cause damage
of the ball joint. When it is damaged during service work,
replace the dust cover.
LOWER ARM BALL JOINT DUST COVER
REPLACEMENT
33200820098
Only when the dust cover is damaged accidentally during
service work, replace the dust cover as follows:
1. Remove the dust cover.
2. Apply multipurpose grease to the lip and inside of the
dust cover.
3. Using the special tool, press the dust cover until it contacts
the snap ring.
4. Check the dust cover for cracks or damage by pushing
it with finger.
MB991006
Snap ring
Dust cover
MB990800