Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 629 / 1164

FRONT SUSPENSION -
On-vehicle Service
33A-5
CAMBER, CASTER AND KINGPIN INCLINATION
Standard value:
Item SPACE
RUNNER
SPACE
WAGON
Camber (difference between right
and left wheel: less than 30’)
0 _ 00’ ± 30’ -0 _ 10’ ± 30’
Caster (difference between right
and left wheel: less than 30’)
2 _ 45’ ± 30’ 2 _ 50’ ± 30’
Kingpin inclination 11 _ 27’ 12 _ 49’
NOTE
1. Camber and caster are preset at the factory and cannot
be adjusted.
2. If camber is not within the standard value, check and
replace bent or damaged parts.
3. For vehicles with aluminium type wheels, attach the
camber/caster/kingpin gauge to the drive shaft by using
the special tool. Tighten the special tool to the same
torque 196 - 255 Nm as the drive shaft nut.
Caution
To prevent the wheel bearing from damage, never
subject the wheel bearings to the vehicle load when
the drive shaft nuts are loosened.
BALL JOINT DUST COVER CHECK
33200860090
1. Check the dust cover for cracks or damage by pushing
it with finger.
2. If the dust cover is cracked or damaged, replace the
upper arm assembly, compression lower arm assembly,
lateral lower arm assembly or stabilizer link.
NOTE
Cracks or damage of the dust cover may cause damage
of the ball joint.
MB991004