Mitsubishi MOTORS Space Runner 1998, Руководство по ремонту

Страница: 585 / 1164

REAR AXLE <4WD> -
Drive Shaft
27B-13
DISASSEMBLY SERVICE POINTS
A
A
"
D.O.J. OUTER RACE REMOVAL
Withdraw the D.O.J. outer race from the B.J. assembly, and
then clean wipe grease from the D.O.J. outer race.
A
B
"
BALL/SNAP RING/D.O.J. INNER RACE/D.O.J.
CAGE REMOVAL
1. Matchmark the drive shaft, D.O.J. inner race and D.O.J.
cage.
2. Remove the balls from the D.O.J. cage.
Caution
Do not use a flat-tipped screwdriver, as it will damage
the balls.
3. Slide the D.O.J. cage from the D.O.J. inner race to the
B.J. side, and then remove the snap ring.
4. Use the special tool to tap the D.O.J. inner race evenly
and gently, and then remove it from the shaft.
A
C
"
D.O.J. BOOT/B.J. BOOT REMOVAL
1. Wipe off grease from the shaft spline.
2. If the D.O.J. boot / B.J. boot is reused, wrap a plastic
tape around the spline of the drive shaft to prevent damage
during removal.
Mating marks
Snap
ring
MB990939