Mitsubishi Electric MR-J5 Series, Руководство пользователя

Страница: 185 / 316

6 OPTIONS AND PERIPHERAL EQUIPMENT
6.13 Noise reduction techniques
183
6
■
Line noise filter (FR-BSF01/FR-BLF)
This filter is effective in suppressing noise radiated from the power supply side and output side of the servo amplifier and also
in suppressing high-frequency leakage current (0-phase current). It is especially effective for noise between 0.5 MHz and 5
MHz band.
■
Radio noise filter (FR-BIF(-H))
This filter is effective in suppressing noise radiated from the power supply side of the servo amplifier, especially in 10 MHz and
lower radio frequency bands. The FR-BIF(-H) is designed for the input only.
200 V class: FR-BIF
Connection diagram Dimensions [Unit: mm]
The line noise filters can be mounted on lines of the main circuit power supply
(L1/L2/L3) and of the servo motor power supply (U/V/W). Pass each of the
wires through the line noise filter the same number of times in the same
direction. For wires of the main circuit power supply, the effect of the filter rises
as the number of passes increases, but generally four passes would be
appropriate. For the servo motor power supply lines, passes must be four
times or less. Do not pass the grounding wire through the filter. Otherwise, the
effect of the filter will drop.
Wind the wires through the line noise filter to satisfy the required number of
passes, as shown in Example 1. If the wires are too thick to wind, use two or
more line noise filters to have the required number of passes, as shown in
Example 2.
Place the line noise filters as close to the servo amplifier as possible for their
best performance. Noise-reducing effect will be enhanced. FR-BSF01 (for wire size 3.5 mm
2
(AWG 12) or less)
FR-BLF (for wire size 5.5 mm
2
(AWG 10) or more)
Connection diagram Dimensions [Unit: mm]
Make the connection cables as short as possible. Grounding is required.
When using the FR-BIF with a single-phase power supply, insulate the lead
wires that are not used for wiring.
MC MCCB
L1
L2
L3
MC MCCB
L1
L2
L3
Example 1
Servo amplifier
Power
supply
Line noise
Filter
(Number of passes: 4)
Example 2
Servo amplifier
Power
supply
Line noise
Filter
For two filters
(Total number of passes: 4)
11.25 ± 0.5
2-φ5 95 ± 0.5
φ33
4.5
Approx. 110
Approx. 22.5
Approx. 65
Approx. 65
130
85
35
31.5
7
80
2.3
160
180
φ 7
MC MCCB
L3
L2
L1
Terminal block Servo amplifier
Power
supply
Radio noise
filter
42
29
44
7
4
58
29
Leakage current: 4 mA
Red White Blue Green
Approx. 300
φ5 hole