Mitsubishi Electric LGH-100RX5 -E, Руководство пользователя

Страница: 92 / 107

C-92
14. Lossnay M-NET Remote Controller
(PZ-52SF-E)
Operation
CENTRAL
HEAT EX.
BY-PASS
AUTO
CHECK
INTERLOCKED
FILTER
ON/OFF
NOT AVAILABLE FILTER
[CENTRAL] Display
Displayed when remote operation is
prohibited by a centralized control unit, etc.
Power Display
Indicates that the Lossnay remote controller
is on.
[FILTER] Display
Displayed when the operating time reaches
the time scheduled for air filter maintenance. [CHECK] Display
Displayed with the address of the
malfunctioning unit (three digits) and the
error code (four digits). (For details, refer to
the “11.Troubleshooting” section)
Operation lamp
On during operation; flashes when a
malfunction occurs.
Ventilation Modes
Indicates the ventilation mode.
Energy recovery
(Heat exchange.)
Bypass
Automatic
(Heat ex./Bypass)
[NOT AVAILABLE] Display
Displayed when the Lossnay unit cannot
perform the function that has been
requested. Display flashes simultaneously
with the display of the unavailable function.
[ON/OFF] Button
Switches between start and stop. The lamp
on the button stays lit during operation.
[Fan Speed Adjustment] Button*
Used to select the fan speed of either "Low"
or "High".
[FILTER] Button
Press two times to reset the filter display.
HEAT EX.
BY-PASS
AUTO
Low High
[INTERLOCKED] Display
Displayed when the Lossnay unit starts
operation via interlocked indoor unit or
external signal.
[Fan speed] Display
Displays the selected fan speed.
[Function Selector] Button
Used to select the ventilation mode from
among energy recovery (Heat exchange),
bypass, or automatic.
*Note:
●
If this button is pressed when trying to
switch the fan speed of a Lossnay unit not
equipped with the fan speed adjustment,
the fan speed display and the “NOT
AVAILABLE” display flash and the fan
speed does not change.
PZ-52SF-E remote controller cannot be used on Lossnay units set for interlocked opera-
tion with Mr. Slim units.
(For details, refer to the PZ-52SF-E Instruction Book and Installation Manual or LGH-RX
4
Technical Manual.)