Mitsubishi Electric LGH-100RX5 -E, Руководство пользователя

Страница: 24 / 107

C-24
5.2 Delayed Interlocked Operation
It is possible to delay operation of the Lossnay if an external device is operating. (Energy saving capability.)
<When PZ-41SLB-E is used> (Refer to page C-91, Remote controller to be set)
●
Choose from 10, 20, 30, 40, 50, and 60 minute delayed Lossnay operation.
●
Delayed operation does not occur if the Lossnay operation was cancelled within the last two hours.
(When turned off for a short time, during a lunch break, for example, if the direction to restart operation is given within two
hours, the Lossnay will restart immediately.)
●
If an operation button is pressed on the remote controller while the delay timer is operating, the delayed operation is can-
celled and normal operation begins.
<When PZ-41SLB-E is not used>
Delays Lossnay operation for 30 minutes.when City Multi or Mr.Slim starts operating or when a external device starts operat-
ing. (Refer to page C-74)
5.3 Multiple External Device Operation
(PZ-60DR-E, PZ-41SLB-E, M-NET)
System Example
When the Operation Signal is a Uncharged a-contact Level Signal.
When there are multiple air conditioners or other external devices
Characteristics Ordered parts Notes
Lossnay operates at the same time as
any of the external devices. Remote controller • Can receive level signal, uncharged
a-contact external signals.
• If the external device is a pulse sig-
nal or charged signal, multiple con-
nections cannot be made.
Uncharged a-contact Uncharged a-contact
Lossnay
Power supply Power supply Power supply Power supply
Uncharged a-contact
* Illustration shows an example when using PZ-60DR-E
Indoor unit
remote controller
Indoor unit of
air conditioner 1
Indoor unit of
air conditioner 2
Indoor unit of
air conditioner 4
Indoor unit
remote controller Indoor unit
remote controller
(Signal cable between
Lossnay and remote
controller must be more
than 500 m.)
φ 0.65 to 1.2 PVC cable or
0.3 mm
2
to 1.25 mm
2
strand wire.
Lossnay Remote
controller
PZ-60DR-E