Configuration
167
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
Change password
Any user who has been assigned an authorisation profile in which the
User access
control
administration right is released is authorised to modify the passwords of all user
accounts. It is therefore advisable to assign this administration right restrictively.
Users whose password has been changed are prompted to enter their newly assigned
password the next time they log in. The same applies to users whose accounts have
been newly created.
Users without the administration right
User access control
can only change their own
password.
Access with incorrect password
After 15 failed login attempts using incorrect passwords the corresponding user ac-
count is blocked; it can then only be reactivated by a user with the
User access control
administration right. He then replaces the old password with a new one. The next time
he logs in, the corresponding user is prompted to change the password and enter the
new one he has been assigned.
Lost password
If another user has also been defined with the
User access control
administration right
released, he can simply overwrite with a new password the password lost by another
user. The next time he logs in, the corresponding user is prompted to change the pass-
word and enter the new one he has been assigned.
Note:
For security reasons, there is no password-free access for the SMB Controller. Be careful with
your passwords.
5. 5. 3
Automatic exit from the configuration
Access to the configuration is interrupted if no changes are made to a parameter value
or the navigation system is not used during a specific timeout.
This is valid for both configuration tools, the SMB Controller Manager as well as for
WebAdmin.
5. 5. 4
WebAdmin access log
An access log with 20 entries is drawn up for each user account so that the history of
accesses to the configuration can be tracked. Denied access attempts using erroneous
