Operation and Maintenance
228
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
E-mail signal destination
With the e-mail client integrated in the communication server, event messages can be
sent to internal or external e-mail destinations. Normally, the signal destination
destination
is automatically assigned to event table 5. Up to 5 e-mail destinations can
be defined, and e-mail notification can be activated or deactivated globally.
For the communication server to send the e-mails the access to the e-mail service pro-
vider's SMTP server must be configured in the
SMTP server
(
=rm
) view.
Destination alarm server (ATAS)
Event messages can also be sent via the ATAS interface, for instance, to an alarm
server. This may be an Mitel Alarm Server or a third-party alarm server. The use of the
ATAS protocol is subject to a licence.
After a first-start of the communication server, the signal destination
Alarm server
(ATAS)
is automatically allocated event table 6. The notification service via the ATAS
interface to the alarm server can be globally switched on or off.
SRM destination
Event messages can also be sent to the SRM server. Depending on the severity level
in the SRM agent, this changes the system status on the corresponding communica-
tion server line. The line colour changes at the same time. If the corresponding positive
event message arrives later or if the event message is confirmed in WebAdmin, the
status and colour are restored again. The following system statuses are defined:
•
Normal
(Blue colour):
No active event messages with the severity level
Serious
or
Critical
is available.
•
Serious
(Yellow colour):
At least one event message is available and needs to be closely examined. (Exam-
ple:
Charge counter overflow
)
•
Critical
(Red colour)
At least one event message is available and is hampering the system's function.
(Example:
Fan failure
)
Note:
Not all negative event messages have a positive match. In this case, the event messages must
be confirmed manually in WebAdmin.
Event messages, which are not
Serious
or
Critical
, are not sent to the SRM server. The severity
of individual event messages is given in the Tab. 89 table.
