Mitel MiVoice Office 400, Системное руководство

Страница: 66 / 257

Expansion Stages and System Capacity
66
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
3. 4. 4 Terminal and network interfaces
Tab. 27 Terminal and network interfaces
FXS Analogue, nationally approved terminals
• Pulse dialling (PUL)
• Frequency dialling (DTMF)
• Radio units for cordless phones
• Door intercoms with DTMF control functions
• Group 3 fax machines
6)
• Answering machines
• Modems
22 200
FXS External equipment can be switched via control outputs 1 1
FXS External switches for controlling internal switch groups via control
inputs 22 200
FXS General bell 1 1 per
node
1) 4 interface cards 8DSI required (not yet supported with Release 6.0)
2) Maximum 64 radio units per location area if 4 location areas are defined, or maximum 128 radio units per lo-
cation area if 2 location areas are defined.
3) Operation on 2 DSI interfaces in each case
4) Not yet supported with Release 6.0
5) Maximum of 2 simultaneous call connections.
6) Transmission with the T.38 protocol is recommended for Fax over IP. The corresponding media resources
need to be allocated.
Max. number... SMBC
AIN with SMBC
as Master
Ethernet interfaces 4
1)
1) Only 1 interface (eth0) is usable for MiVoice Office 400
per node
Network interfaces, total (FXO, BRI-T, PRI, BRI-S
ext.
) 16 96
Terminal interfaces, total (DSI, FXS, BRI-S) 22 200
DSI terminal interfaces 32
2)
2) In maximum expansion network access is possible only via IP
200
Analogue terminal interfaces FXS 22
2)
200
BRI-S terminal interfaces 12
2)
200
Analogue network interfaces FXO 16 64
Basic rate interfaces, total (BRI-T, PRI, BRI-S
ext.
) 16 96
Primary rate interfaces PRI
3)
3) 10 B channels per PRI network interface can be used without licence
4 32
SIP access 10 10
SIP access channels
4)
240 240
Inter-
face
Terminal type Terminal SMBC
AIN with
SMBC as
Master
per
inter-
face