Installation
120
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
Fig. 39
Connection possibilities for DSI terminal interfaces on single assigned RJ45 sockets
With interface cards 8DSI
1)
and the appropriate wiring adapters, DSI terminal inter-
faces can be made available at the multiply assigned RJ45 sockets x.1 and x.2. The
signals can be split again to individual RJ45 sockets using patch cables and the fan-out
panel FOP (see "Fan-out panel FOP", page 138) or with 8-fold assigned connecting
cables (see e.g. "Prefabricated system cable 4 x RJ45", page 106).The possible RJ45
sockets are highlighted in colour in the figure below.
Fig. 40
Connection possibilities for DSI terminal interfaces on multiply assigned RJ45 sockets
Note
It is possible to connect a DSI phone on the multiple assigned RJ45 sockets x.1 and x.2 directly
without using a fan-out panel FOP. The following 2 ports are available in this case: Port 1 on x.1
and port 2 on x.2. Additionally port 7 is available on x.3 and port 8 is available on x.4.
Note
Circuit type as per EN/IEC 60950: SELV
1) Not yet supported with Release 6.0
(WK
(WK
(WK
);6
);6
);6
);6
);6
);6
(WK
(WK
(WK
(WK
);6
);6
);6
);6
);6
);6
(WK
