MISUMI DS102MS, Руководство по эксплуатации

Страница: 87 / 166

87
4.1.3 Driving mode select（JOG KEY）
Select each driving mode when each axis operation stop. Press Jog key, it start to display driving
mode select. Select the function by using the arrow key and press ENTER key, then move to each
driving mode.
4.1.3.1 Continuous driving mode（CNT：Continue Mode）
Display as bellows by selected CNT.
←、→、↑、↓ during press any key, drive with setting each parameter.
← key： X(Z,V) axis drive to -(CCW)
→ key： X(Z,V) axis drive to +(CW)
↑ key： Y(U,W) axis drive to +(CW)
↓ key： Y(U,W) axis drive to -(CCW)
4.1.3.2 Uniform pulse driving mode（STP： Step Mode）
Select STP, display as bellows.:
←、→、↑、↓ press any key, start to drive uniform pulse in each parameter.
← key： X(Z,V)axis drive to -(CCW)
→ key： X(Z,V)axis drive to +(CW)
↑ key： Y(U,W)axis drive to +(CW)
↓ key： Y(U,W)axis drive to -(CCW)
STOP key：Stop all axes
＊ Press shortcut key(Set key)at the step mode, display「Set up uniform pulse distance」.
（Return to step mode screen with Set key）
C N T S T P O R G H O M
A B S
Jog
7
C X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Operation
mode
Axis
Code Current
position
Status
Unit
Speed table number
ＣＮＴ Mode
S X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Operation mode
ＳＴＰ Mode