MISUMI DS102MS, Руководство по эксплуатации

Страница: 96 / 166

96
⑪Near Origin（Near Origin Sensor Logic setting）
Set up each axis Near Origin Sensor Logic Setting
When select the
“ Near Origin ” , to be Near Origin Sensor Logic setting screen. Display the cursor on
left lateral of setting axis.
Move cursor to the left-lateral of axis that set with ↑,↓ key.
※Return to parameter selection screen with ESC key.
After axis selected, press Enter key, display the cursor on left-lateral of setting data, and then input
the setting data with ↑、↓key.
After setting finished, press Enter key, be moved the cursor on left-lateral of axis and input any other
axis.
※During input the setting data, press ESC key, might be return to select the setting axis without
input setting data.
⑫Drive Direction（Motor Driving Direction）
Set up each axis Motor Driving Direction Setting.
When select the
“ Driving Direction ” , to be Motor Driving Direction setting screen. Display the cursor
on left lateral of setting axis.
Move cursor to the left-lateral of axis that set with ↑,↓ key.
※Return to parameter selection screen with ESC key.
After axis selected, press Enter key, display the cursor on left-lateral of setting data, and then input
the setting data with ↑、↓key.
After setting finished, press Enter key, be moved the cursor on left-lateral and input any other axis
※During input the setting data, press ESC key, might be return to select the setting axis without
input setting data.
NO X B
Y
B
Parametor
Axis
Setting data
Cursol position for selected axis Cursol position for input data
D D X P o s i t i v e
Y N e g a t i v e
Parametor Axis
Setting data
Cursol position selected axis Cursol position input data