MISUMI DS102MS, Руководство по эксплуатации

Страница: 90 / 166

90
①Pulse(STP) （Uniform pulse driving, Set up distance value）
Set up distance at uniform pulse driving（Step Mode）
Select
“ Pulse(STP) ” , shows as below.: Press ↑,↓ key, select a setting axis.
Return to parameter select screen with ESC key.
After axis selected, press Enter key, display the cursor on left lateral of setting data. Can be input the
setting data with numeric keypad.
After setting finished, press Enter key, be moved the cursor on left lateral and input any other axis.
※During input the setting data, continue to press ESC key（1 sec.） , might be return to select the setting
axis without input setting data.
②Pulse(ABS) （Set up absolute position）
Select driving position at absolute position driving（ABS Mode）
Display as below with
“ Pulse(ABS) ” , Select setting axis with ↑,↓ key. Return to parameter
select screen with ESC key.
After axis selected, press Enter key, display the cursor on left lateral. Can be input the setting data with
numeric keypad.
※ “+”no displayed
After setting finished, press Enter key, be moved the cursor on left-lateral and input any other axis
※During input the setting data, continue to press ESC key（1 sec.）, might be return to select the
setting axis without input setting data.
P S X 1 0 0 . 0 u
Y 1 0 0 0 d
Parametor
Axis
Setting data unit
Cursor position at select axis
P S X 1 0 0 . 0 u
Y 1 0 0 0 d
Parameter
Axis
Setting data unit
Cursor position at input data
P A X 2 0 0 . 0 u
Y - 2 0 0 0 d
Parameter
Axis
Setting data
Unit
Cursor position at select axis
P A X 2 0 0 . 0 u
Y - 2 0 0 0 d
Carsor position at input data