MISUMI DS102MS, Руководство по эксплуатации

Страница: 91 / 166

91
③Speed Table（Set up speed table）
Set up starting speed(L), driving speed(F), acceleration and deceleration rate(R ) and S acceleration
and deceleration rate(%). Display each (L)(R)(S) setting data and speed table number when select
“ Speed Table ” shown as below.: At this time, “ * ” shows on left-lateral of setting item. Be moved
“ * ” with ←、→ key , then select（R）or (S). Select speed table number with ↑、↓ key. Return to
parameter select screen with ESC key
← key： Move the cursor(*)to the left. Case of cursor is in left-lateral S rate(S), change the screen
and display the acceleration and deceleration rate.(See the above)
→ key： Move the cursor(*)to the right. Case of cursor is in left-lateral (R), change the screen and
display the S acceleration and deceleration rate(S). (See the above)
↑キー： Speed Table Number change to order 9→8→…→1→0
↓キー： Speed Table Number change to order0→1→…→8→9
※ Return to parameter select screen if press ESC during select the Speed Table or
setting item
After moved by arrow key, press Enter key and then change to →. Possible to input with numeric
keypad. (* Displayed in continuous pressing ESC key). After input, press Enter key, be confirmed
setting value and change → to
“ * ” .
④Unit Set（Set up units and division number）
Set up the unit, the distance per pulse at full step and division number of driver.
This set up shows distance per pulse,
（Distance per pulse at the full step）÷（Division number of driver）
automatically calculated.
Display cursor when select
“ Unit Set ” , jump to setting screen that set units.
Move the cursor to left-lateral of axis that set with ↑、↓key.
Return to parameter select screen with ESC key.
After select the setting axis, press Enter key,
“ Unit(UN) ” and “ Distance per 1 pulse at the full step ”
(ST)of axis that selected as bellows.:
U S X - a x i s
Y - a x i s
Parametor Carsor
Setting axis
X U N m ( m m )
S T 0 . 0 0 1
Setting
axis
Cursor Setting data Item
* L 0 F 0 R 0
1 0 1 0 1
Data Data
Cursor
Data
Item
Table Number
S 0
1 0
Cursor
Data
Item Table Number