MISUMI DS102MS, Руководство по эксплуатации

Страница: 100 / 166

100
（1）CNT
Use ↑、↓ key, and change the teaching number. (Counted up and down continuously-pressed
over 1sec.) Press ENTER key with displaying teaching number, then jump to following screen.
It is possible to drive Jog with arrow key. Press SET key at the registered position, display cursor.
Select registered axis with ↑、↓ key, press ENTER key, then coordinate registration.
Press ESC key, return to teaching point selection screen.
※ Can be changed speed table during teaching mode.
（2）STP
Change the teaching point with ↑、↓ key,（Counted up and down continuously-pressed over
1sec.）. Press ENTER key with displaying teaching number, then jump to following screen.
It is possible to drive STEP with arrow key. Press SET key at the registered position, display cursor.
Select registered axis with ↑、↓ key, press ENTER key, then coordinate registration.
Press ESC key, return to teaching point selection screen.
※ Can be changed speed table during teaching mode.
C X 1 2 3 4 5 6 7 8 p < 0
T Y - 9 8 7 6 5 . 4 3 2 u > 1
Driving mode
Cursol
Teachng Mode
C N T S E T 1 2
Mode Teaching Point Number
S T P S E T 1 2
Mode
Teaching point number
S X 1 2 3 4 5 6 7 8 p < 0
T Y - 9 8 7 6 5 . 4 3 2 u > 1
Driving Mode
Cursol
Teaching Mode