Mindray BeneView T1 Скачать руководство пользователя страница 4

Страница: 4 / 286

Intellectual Property Statement

SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called Mindray) owns the intellectual property

rights to this Mindray product and this manual. This manual may refer to information protected by copyrights or

patents and does not convey any license under the patent rights of Mindray, nor the rights of others.

Mindray intends to maintain the contents of this manual as confidential information. Disclosure of the information in

this manual in any manner whatsoever without the written permission of Mindray is strictly forbidden.

Release, amendment, reproduction, distribution, rental, adaption and translation of this manual in any manner

whatsoever without the written permission of Mindray is strictly forbidden.

and

are the registered trademarks or trademarks owned

by Mindray in China and other countries. All other trademarks that appear in this manual are used only for editorial

purposes without the intention of improperly using them. They are the property of their respective owners.

Responsibility on the Manufacturer Party

Contents of this manual are subject to changes without prior notice.

All information contained in this manual is believed to be correct. Mindray shall not be liable for errors contained

herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this

manual.

Mindray is responsible for the effects on safety, reliability and performance of this product, only if:



all installation operations, expansions, changes, modifications and repairs of this product are conducted by

Mindray authorized personnel;



the electrical installation of the relevant room complies with the applicable national and local requirements;



the product is used in accordance with the instructions for use.

WARNING



This equipment must be operated by skilled/trained clinical professionals.



It is important for the hospital or organization that employs this equipment to carry out a reasonable

service/maintenance plan. Neglect of this may result in machine breakdown or personal injury.

Содержание BeneView T1






























































































































































































































































































Результаты поиска

Содержание BeneView T1

Отзывы:

Похожие инструкции для BeneView T1

Бренды по названию

Популярные бренды

Mindray BeneView T1, Руководство оператора

Результаты поиска

Содержание BeneView T1

Отзывы:

Похожие инструкции для BeneView T1

Бренды по названию

Популярные бренды