Mindray BeneView T1, Руководство оператора

Страница: 60 / 286

5-
4
5.8 Discharging a Patient
To discharge a patient:
1. Select [ Main Menu ]
→
[ Patient Setup >> ].
2. Select [ Discharge Patient ]. In the popup menu, you can either:

Directly select [ Ok ] to discharge the current patient, or

Select [ Standby ] then [ Ok ]. The patient monitor enters the standby mode after discharging the current
patient, or

Select [ Cancel ] to exit without discharging the patient.
NOTE

Discharging a patient clears all history data in the monitor.
5.9 Transferring a Patient
You can transfer patient data between monitors without re-entering the patient demographic information.
Transferring of patient data enables you to understand the patient’s history condition. The patient data that can be
transferred includes: patient demographics, trend data, alarm events and parameters alarm limits.
You can use a USB Drive to transfer data between two patient monitors. You can also connect T1 with the host monitor
to implement patient transfer.
WARNING

Do not discharge a patient before the patient is successfully transferred.

After a patient is successfully transferred, check if the patient settings (especially patient category, paced
status and alarm limits settings, etc) on the monitor are appropriate for this patient.
NOTE

The system automatically switches on the HR alarm and lethal arrhythmia alarm after transferring the
patient data.
5.9.1 Transferring Patient Data via a USB Drive
Select [ Others >> ] from [ User Maintenance ] menu. In the popup menu, set [ Data Transfer Method ] to [ USB Drive ].
You can also set [ Transferred Data Length ]. The default is [ 4 h ].