Mindray BeneView T1, Руководство оператора

Страница: 77 / 286

7-7
7.5.1 Setting Alarm Properties for All Parameters
In the main menu, select [ Alarm Setup >> ]
→
[ Parameters ]. You can review and set alarm limits, alarm switches, and
alarm level for all parameters.
WARNING

Make sure that the alarm limits settings are appropriate for your patient before monitoring.

When monitoring patients that are not continuously attended by a clinical operator, properly configure the
alarm system and adjust alarm settings as per the patient's condition.

Setting alarm limits to extreme values may cause the alarm system to become ineffective. For example, High
oxygen levels may predispose a premature infant to retrolental fibroplasia. If this is a consideration do NOT
set the high alarm limit to 100%, which is equivalent to switching the alarm off.
7.5.2 Adjusting Alarm Limits Automatically
The monitor can automatically adjust alarm limits according to the measured vital signs, using the auto limits function.
When auto limits are selected, the monitor calculates safe auto limits based on the latest measured values.
To get accurate auto alarm limits, you need to collect a set of measured vital signs as a baseline. Then, in the main menu,
select [ Alarm Setup >> ]
→
[ Parameters ]
→
[ Auto Limits ]
→
[ Ok ]. The monitor will create new alarm limits based on the
measured values.
Before applying these automatically created alarm limits, confirm if they are appropriate for your patient in the mass
alarm setup menu. If not, you can adjust them manually. These alarm limits will remain unchanged until you select auto
limits again or adjust them manually.
The monitor calculates the auto limits based on the following rules.
Module Parameter
Low alarm limit High alarm limit
Auto alarm limits range
Adult/
pediatric
Neonate
Adult/
pediatric
Neonate
ECG HR/PR
HR × 0.8 or
40bpm
(whichever is
greater)
(HR – 30) or
90bpm
(whichever is
greater)
HR × 1.25 or
240bpm
(whichever is
smalle)
(HR + 40) or
200bpm
(whichever is
smaller)
Adult/pediatric: 35 to 240
Neonate: 55 to 225
Resp RR
RR × 0.5 or 6
rpm
(whichever is
greater)
(RR – 10) or 30
rpm (whichever
is greater)
RR × 1.5 or 30
rpm (whichever
is smaller)
(RR + 25) or 85
rpm (whichever is
smaller)
Adult/pediatric: 6 to 55
Neonate: 10 to 90
SpO
2
SpO
2
Same as the
default alarm
limit
Same as the
default alarm
limit
Same as the
default alarm
limit
Same as the
default alarm limit
Same as the measurement range