Mindray BeneView T1, Руководство оператора

Страница: 107 / 286

8-21
8.9 ECG Relearning
8.9.1 Initiating an ECG Relearning Manually
During ECG monitoring, you may need to initiate an ECG relearning when the patient’s ECG template changes
dramatically. A change in the ECG template could result in:

incorrect arrhythmia alarms

loss of ST measurement, and/or

inaccurate heart rate
ECG relearning allows the monitor to learn the new ECG template so as to correct arrhythmia alarms and HR value, and
restore ST measurements. To initiate relearning manually, select the ECG parameter window or waveform area
→
[ Relearn ]. When the patient monitor is learning, the message [ ECG Learning ] is displayed in the technical alarm area.
CAUTION

Take care to initiate ECG relearning only during periods of normal rhythm and when the ECG signal is
relatively noise-free. If ECG learning takes place during ventricular rhythm, the ectopics may be incorrectly
learned as the normal QRS complex. This may result in missed detection of subsequent events of V-Tach and
V-Fib.
8.9.2 Automatic ECG Relearning
ECG relearning is initiated automatically whenever:

The ECG lead or lead label is changed

The ECG lead is re-connected

A new patient is admitted

After the calibration is completed, select [ Stop Calibrating ECG ]

Switch between normal screen and 12-lead full screen for 12-lead ECG monitoring.

The paced status of the patient is changed.