Mindray BeneView T1, Руководство оператора

Страница: 196 / 286

20-2
20.3.2 Transferring Data by Different Means
NOTE

Never enter the data transfer mode when the patient monitor is in normal operation or performs
monitoring. You must re-start the patient monitor to exit the data transfer mode.
Transfer data via a crossover network cable
Before transferring data using a crossover network cable, do as follows:
1. Connect the T1 to the T1 docking station.
2. Connect one end of the crossover network cable to the T1 docking station and the other end to the PC.
3. Set the IP address of the PC. This IP address must be in the same network segment with that of the patient monitor.
4. Make sure that the data export system is active on the PC.
Then, follow this procedure to transfer data:
1. Select [ Main Menu ]
→
[ Patient Data >> ]
→
[ Transfer Data ].
2. Select [ Yes ] from the popup message box.
3. Input the IP address already set on the PC.
4. Select [ Start ] to start transferring data.
Transfer data within a LAN
Before transferring data within a LAN, do as follows:
1. Connect the patient monitor and the intended PC into the same LAN and acquire the PC’s IP address.
2. Make sure that the data export system is active on the PC.
Follow the same procedure as via a crossover network cable to transfer data.