Mindray BeneView T1, Руководство оператора

Страница: 76 / 286

7-6
7.4.5 Setting the Reminder Tones
When the alarm volume is set to zero, or the alarm is reset or switched off, the patient monitor issues a periodical
reminder tone.
1. Select [ Main Menu ]
→
[ Maintenance >> ]
→
[ User Maintenance >> ]
→
enter the required password.
2. Select [ Alarm Setup >> ] to enter the [ Alarm Setup ] menu.
3. Set the [ Reminder Tones ] to [ On ], [ Off ] or [ Re-alarm ]. When [ Re-alarm ] is selected, the acknowledged
physiological alarms and technical alarms marked with “
√
” will be re-generated after the [ Reminder Interval ] if
the alarm condition persists.
To set the interval between reminder tones, select [ Reminder Interval ] and toggle between [ 1min ], [ 2min ] and [ 3min ].
In addition, you can set the volume of alarm reminder tones. To set the volume of alarm reminder tones, select [ Main
Menu ]
→
[ Alarm Setup >> ]
→
[ Others ]. Then, select [ Reminder Vol ] and toggle between [ High ], [ Medium ] and [ Low ].
7.5 Understanding the Alarm Setup Menu
Select [ Main Menu ]
→
[ Alarm Setup >> ] to enter the [ Alarm Setup ], where you can:

Set alarm properties for all parameters.

Change ST alarm settings.

Change arrhythmia alarm settings.

Set the threshold for some arrhythmia alarms.

Change other settings.
Please refer to the 8 Monitoring ECG for how to change ST alarm settings, how to change arrhythmia alarm settings and
how to set the threshold for some arrhythmia alarms.