Microplex SOLID 166E, Руководство оператора

Страница: 34 / 141

34 Paper Handling
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 166E Edition 1.1
4. Raise the elevator table by hand, until it stops.
Figure 3.2.7.c Raising the elevator table of the stacker
3.2.8. Troubleshooting (Stacker)
To ensure proper stacking, please note the following:
• As the media exits the printer, it has to pass through the two paper guide rollers
located at the top rear side of the stacker.
This may occasionally require you to guide the media into the rollers.
• As the media enters the paper output tray of the stacker, the media has to fold in
the natural way.
Make sure the first fold of the media is performed in the same way, as it came
out of the media box. By this the media should continue to fold and lay
naturally. (Compare section 3.2.4 Stacker Panel Functions: DIRECTION key.)
Elevator
table