Operator Maintenance
95
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
6.2. Printer Cleaning
!
By a regular and conscientious performance of the following
operations, the printer is guaranteed to always work at an optimum
reliability.
After the printing of about 30,000 pages of 12”x17”(print density
4 %; compare chapter 9 Specifications) the components listed in
this chapter should be cleaned. (For some components different
values for the number of pages are valid; see following pages).
!
For safety disconnect the printer from the main power first. Make
sure the components that are to be cleaned have cooled down.
Please be especially careful to avoid damaging mechanical or
electronic modules.
Do not use detergents, or any other devices or tools not mentioned
in this manual to avoid damages and unnecessary costs of repairs.
Please do only use the auxiliary materials being contained inside
the cleaning kit.
When the desired print quality is not obtained even after those
cleaning operations, replace the Chargers for improvement. (Keep
them in storage if necessary.)
When the desired print quality is still not obtained, please call for a
MICROPLEX authorized service engineer.
