124 Troubleshooting
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
5.
Swivel the
lever of the transport unit
to the left (approx.
90° countercklockwise, compare the following figure).
The transport path will be shifted down. Do not pull out the
transport unit at this time.
Fig. 7.4.2.e Swivelling the lever of the transport unit
6.
Rotate
knob “A“
approx. 90° clockwise to
release the
scuff roller
:
Fig. 7.4.2.f Releasing the scuff roller
7.
If you want to pull out the
fuser unit
the bracket (see figure
above) has to be disassembled first.
Caution: It is not allowed to use the printer while the bracket is
disassembled.
Lever
(green)
Knob A
Bracket for
the fuser unit
Fuser unit
