Specifications 135
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
9. Specifications
Printer:
Print technology:
LED array electrophotographic system, flash fusing system based on
a Xenon
Print speed:
up to 166 A4 pages per minute in the Two-Up mode
Resolution:
300/600 dpi (dots per inch, horizontal and vertical)
Warm-up time:
60 seconds max.
Paper weight:
64 - 209 g/m
2
(wood-free paper)
64 - 105 g/m
2
(wood-free labels)
Paper size:
width: 7” (17.8 cm) to 18” (45.7 cm), 17” printable *)
length: 7” (17.8 cm) to 20” (50.8 cm)
Interfaces:
parallel: IEEE 1284 (Centronics), (MP-BUS, SPS-Control, optional)
LAN: Ethernet 10/100 Mbit (TCP-IP)
Optional:
LAN: Ethernet (SPX-IPX, LAT), Token Ring
Host: IBM SCS / IPDS (Twinax/Coax), Siemens (BAM/SS-97)
Size:
1350 mm (H) x 1580 mm (W) x 870 mm (D)
(measurements of stacker; the touch panel is not considered)
Weight:
about 550 kg (Europe, United Kingdom e.g.)
about 450 kg (North America)
Noise level:
operation:
≤
66 dB(A)
stand by:
≤
52 dB(A)
Environment:
temperature: +10°C to +30°C (50°F to 86°F) operating
- 10°C to +35°C (14°F to 95°F) non-operating
relative atmospheric humidity: 30% to 80% operating
10% to 80% non-operating
*) Hint:
Fanfold material cannot be printed in the area of the sprocket holes, even in the
distance up to 5mm around the sprocket holes a reduced print quality has to be
expected.
