30 Paper Handling
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
3.2.4. Stacker Panel Functions
The control panel of the stacker offers the following keys:
Figure 3.2.4.a Control panel of the stacker
• FORM FEED:
Sends a form feed command to the printer
• EJECT:
Sends a cut command to the printer
Use the EJECT Button to cut the job
•
DOWN:
Lowers
the
elevator
until it reaches its maximum lower
position, or until the key is released.
(The elevator table is moved UP by hand.)
• DIRECTION:
To change the direction of stacking (swinger)
• HEAVY: ON = “Heavy Mode” for thicker paper (the LED shines);
OFF = “Normal Mode” for thinner paper (the LED is not shining).
