106 Operator Maintenance
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
!
Fig. 6.3.d Inserting the new toner cartridge
10.
Slide the toner cartridge slowly into the device and pull off the
plastic seal (adhesive tape) at the same time (see arrows in the
figure above).
Hint:
Roll or fold the sealing strip as you pull. This avoids
snapping the sealing strip when it reaches the end of the
toner cartridge and scattering any loose toner on the
sealing strip.
11.
Completely remove the plastic seal and discard it.
12.
Align the two toner cartridge notches with the two developing unit
pins (see following figure).
Sealing
tape
