Panel Functions 69
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
5.14. Data - Interface Configuration
This function is used to set the interface parameters.
Panel display
[SOLID 166E ]
[Menu Level 1
]
(
(
(
[Configuration
]
[Interface
]
[SIA Timeout ]
[Digit3 030 ]
(
(
(
[Digit2 040
]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Configuration ] is displayed.
The currently set value for he timeout is
displayed (here: 30 seconds).
Pressing the PLUS or MINUS key
changes the value of the current digit
(Digit 3 = left position, in this example:
0). Pressing the NEXT key moves you
to the next digit (the PREVIOUS key
moves you back, if need be).
You can use the number block to set
the function value, too.
The timeout (the waiting period for SIA
to switch to the next interface) is
increased to 40 seconds.
In addition this new value can be
saved as setup value (using the ENTER
key), before the printer is turned ON
LINE again.
Note:
The printer uses SIA (Simultaneous Interface Administration) to check,
which interface is currently used for the transfer of print data.
