Troubleshooting 127
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
After having removed the jammed paper:
14.
Use the green lever (still in down position, compare figure
above) to
push the transport unit back into the printer
until it touches.
15.
Swivel the
lever of the transport unit
to the right (approx.
90°
clockwise
, see next figure). The transport path will be
shifted up.
Pay attention to the second bar of the transport unit
located under the lever - it also has to click into
place (second bar up).
Lever
Second bar up
Fig. 7.4.2.j Second bar of the transport unit
Both locks of the transport unit have to be engaged to
avoid damaging the printer.
