Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 62 / 72

62
|
PROVENO E
Rev. 1.2 (24.08.2016) Adjustment instructions
6. Adjustment instructions
6.1. Setting customer specifi c parameters
By setting the customer specifi c parameter it is possible to modify certain functions of the Proveno
combi-kettle to better suit a kitchen’s or customer’s individual needs. In general, the preset factory set-
tings are well suited to most users, so the settings need only be modifi ed to meet the special conditions
or modes of operation in a kitchen. The customer specifi c parameters are normally set by the person in
charge of the kitchen activities.
The combi-kettle has to be in the stand-by mode when starting to alter customer specifi c parameters.
This means that ‘On’ is shown on the temperature display and the time on the timer display (in case the
kettle is fi tted with a timer option). No functions are allowed to be in operation.
The customer parameter setting mode can be accessed as follows:
Simultaneously press the temperature and the tilting reverse buttons for 3 seconds:
’CodU’ appears on the temperature display.
After this press the temperature button for 3 seconds.
The fi rst parameter ’Pr00’ appears on the temperature display.
By using the central dial, search within 3 seconds the desired parameter between Pr00 - Pr52.
When the desired parameter appears on the display, press briefl y the temperature button.
In case the parameter is in use, its setting value is shown on the display of the function it relates to.
Functions have not been defi ned for all parameters. The table at the end of this chapter specifi es the
parameters in use.
Change the parameter using the central dial.
Confi rm the new setting by pressing the temperature button for 3 seconds.
When the displayed value goes out, this indicates that the new setting has been saved in the memory.
Select a new parameter using the central dial and wait for 10 seconds, so the combi-kettle
will revert to the stand-by mode.