Metos PROVENO E Скачать руководство пользователя страница 27

Страница: 27 / 72

PROVENO E

Rev. 1.2 (24.08.2016)

Operation instructions

Pre-set mixing programs (P1 - P6)

Select the mixing function. Message ’15’ appears on the mixing display

Select the desired mixing program P1 - P6.

Start the mixing program.

The display shows the number and phase of the program in operation (e.g. P2.2). The pre-set programs
are as follows:

P1 Gentle stirring with pause, soups

- total time: continuous, max. 5 hours

P2 Meat cooking, powerful auto-reverse mixing

- total time: 44 min., whereof 6 min. crumbling

P3 Mashed potatoes, powerful auto-reverse mixing

- total time: 13 min. whereof 6 min. mashing

P4 Desserts

- total time: 1 hour 20 min., whereof last 40 min. whipping

P5 Porridges

- total time: 1 hour 40 min.

P6 Doughs

- total time: 6 min.

Pre-set cleaning program (Cln)

The last pre-set program Cln is a mixing program that can be used to intensify soaking preferably used
together with a cleaning tool.

Cln

Cleaning program

-runs until stopped

Interrupting/continuing the mixer program

Press the start/pause button once.

The mixer stops according to the instructions also if the lid is opened.

The correct way to stop the mixer is to press the stop or start/pause button

Opening the lid activates the emergency/stop function.

Stopping the mixer program

Press the stop button once.

The mixer stops according to the instructions also if the lid is opened.

The correct way to stop the mixer is to press the stop or start/pause button:

Opening the lid activates the emergency/stop function.

Содержание PROVENO E









































































Результаты поиска

Содержание PROVENO E

Отзывы:

Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 27 / 72

Результаты поиска

Содержание PROVENO E

Отзывы: